User's Manual

GETTING STARTED
Kit contents
Before you start using your M ARTIAN W ATCH , make sure the following items are in the box:
• M ARTIAN W ATCH (A)
• Micro-USB charging cable (B)
Charging
The charging cable can be plugged into your computer’s USB port or a power outlet (wall
adapter sold separately). A solid red light will appear when the Watch is receiving power. Charge
your M ARTIAN W ATCH until the light changes to green (approximately 2 hours). Unplug from
cable and you’re ready to turn on your M ARTIAN W ATCH , pair to your cell phone, and set the
time.
Turning Your M ARTIAN W ATCH On and Off
To turn your Watch on, tap both buttons simultaneously. The green light will flash 6 times, the
Watch will vibrate, and the OLED will display “Hello”. Tap both buttons again when you want to
turn the Watch off. The red light will flash 6 times, the Watch will vibrate and the OLED will
display “Good-bye”.
Checking Battery Life
On a full battery, you will have 2+ hours of talk time or 7 days of standby time, and the Watch
will run for approximately 30 days. When the Watch is turned on, you can check the battery level
by pressing the bottom button to access the status menu during charging or operation. The
B
A
Pairing
button
Watch
crown