User's Manual

on your cell phone.
Call Volume and Mute:
While you are on a call, if you want to change the volume press the bottom button multiple
times. This will cycle through the 3 options, which you will see on your OLED display. Simply
stop when you reach the option you want to use: Low, Medium, or High. When you finish your
call, Martian will revert back to the default Sound Profile setting.
To mute your Martian microphone during an active call, press and hold the bottom button until
the word “Mute” appears on the OLED display. The LED will change from green flashes to
alternating green and red flashes until you press and hold the bottom button to un-mute.
Disconnecting your Watch During an Active Call:
To disconnect your Martian (while keeping the call active) or switch audio to another device (e.g.
a paired headset) during an active call, use your phone’s menu to make your choice, or tap and
release both buttons on the side of the Watch (this turns the Watch off, so if you do this make
sure to press both buttons again after you complete your call to turn Martian back on!).
Text messages, Emails and Notifications
Incoming:
When you receive a text message, the Watch vibrates, the blue light flashes, and the name or
number of the caller is displayed on the OLED, followed by the first 18 characters of the
message, which scrolls across the screen.
If you have Voice Command, you can also tap the top button, and after you hear your Voice
Command’s “beep”, command “read text” to have your text message read to you.
When you receive a social media notification (must be enabled via Martian app), the Watch
vibrates, the blue light flashes, and the first 20 characters of the notification message scroll
across the screen.
When you receive an email notification (must be enabled via Martian app), the Watch vibrates,
the blue light flashes, and the OLED displays the message “<your email> has XX unread
emails”.
To reject any incoming notification, press the bottom button.
To create or reply to a text, or set a reminder:
Press and release the top button. The green light will flash to acknowledge your request. Wait
until you hear your Voice Command’s “beep”, then interact with Voice Command as you would
from your phone.