Instructions / Assembly

First Course of Stone

Step 3 ATTACHING THE FIRST COURSE OF STONE

A. Use a temporary support (1/2” wood piece or similar material - not included) to

support first course of pillar stone and keep it level with the bottom edge of the

pillar frame.

B. Attach Pillar Stone to Pillar Frame with Silvermine Stone Fastener

- Use 2 screws per panel

- Place screw 3/4” - 1” above pillar stone and 1”

from the edge, into the metal flashing.

- Use Level

C. Repeat Step 3B for the remaining bottom course of pillar stones

TIP: Be sure to use your level! The first row sets the stage for the remaining stone

layers - so be diligent on making sure this row is level.

Step 3 STEP-BY-STEP

Pre-Cut

Stones

Level

(not included)

NEEDED ITEMS FOR THIS STEP

1/2” piece of wood

FRONT SIDE

Pillar Frame

Silvermine Stone

Fasteners

Drill

(not included)

1/2” Piece of Wood

(not included)