Instructions / Assembly

ManualsBrandsSilvermine Stone ManualsBuilding materials18 in. x 36 in. Evening Gray with a Slate Split Cap Stone Pillar Kit

The First Brand of Mortarless Stone Veneer

silverminestone.com

Pillar Kits

Instructions

Pillar Kit Includes:

Tools Needed (not included)

4.2

4.1

VOILA!

Pillar Cap

Pillar Stones

Level 1/2” piece of wood Construction

Adhesive

· Pillar Cap

· Pre-Cut Pillar Stones

36” Pillar Kit .........................3 boxes

48” Pillar Kit .........................4 boxes

· Pillar Frame Kit

Right Side Panel

Left Side Panel

Back Side Panel

Upper Front Panel

Lower Front Panel

Stainless Steel Frame Assembly Screws

Top Frame Plate

Silvermine Stone Fasteners

4.2

4.1

Drill

Summary of content (5 pages)

PAGE 1
Pillar Kits Instructions silverminestone.com The First Brand of Mortarless Stone Veneer 2 3 1 4.2 Pillar Cap 4.1 8 5 6 Pillar Stones VOILA! Pillar Kit Includes: · Pillar Frame Kit · Pillar Cap 1 Right Side Panel · Pre-Cut Pillar Stones 2 Left Side Panel 36” Pillar Kit..........................3 boxes 3 Back Side Panel 4.1 Upper Front Panel 4.2 Lower Front Panel 48” Pillar Kit..........................4 boxes 5 Stainless Steel Frame Assembly Screws .
PAGE 2
Step 1 ASSE MB L E THE F R A ME N E ED E D ITE MS FO R THIS STEP 1 6 2 3 4.1 Drill (not included) Top Plate 5 Stainless Steel Screws Frame Panels Step 1 STE P - BY- STE P A. ATTACH - Back Panel 3 to Right Side Panel 1 using (5) stainless steel screws B. ATTACH - Left Side Panel 2 to Back Panel 3 using (5) stainless steel screws C. ATTACH - Long Front Side Panel 4.1 to the TOP of Left Side Panel 2 using (3) stainless steel screws D. ATTACH - Long Front Side Panel 4.
PAGE 3
Step 2 M O UN TIN G THE F R AME N E ED E D ITE MS FO R THIS STEP Level (not included) Mounting Hardware for Pillar Frame Base (not included) Drill (not included) See Local Building Codes 4.2 5 Frame Panel Stainless Steel Screws Step 2 STE P - BY- STE P A. Set assembled pillar frame in place with the 2x4 base blocks on the bottom B. Use Level (not included) to ensure frame is plumb - Shim if necessary C.
PAGE 4
Step 3 AT TAC HIN G THE F IR ST COURSE OF STONE N E ED E D ITE MS FO R THIS STEP Level (not included) Drill (not included) Silvermine Stone 1/2” Piece of Wood (not included) Pre-Cut Stones 8 Fasteners Step 3 ST E P - BY- STE P A. Use a temporary support (1/2” wood piece or similar material - not included) to support first course of pillar stone and keep it level with the bottom edge of the pillar frame. B.
PAGE 5
Step 4 B UILDIN G UP YO UR STONE PI LLAR N E ED E D ITE MS FO R THIS STEP Drill Level (not included) (not included) Pillar Cap Pre-Cut Stones Silvermine Stone 8 Fasteners Step 4 STE P - BY- STE P A. Remove temporary support B. Repeat Step 3B for each course of stone* *Make sure that each stone is firmly in contact with the stone below it When ONE COURSE of stone remains to be adhered... C. Bend metal flashing horizontally D.