Owner's manual

www.silverlinetools.com
7
Petrol Chainsaw 52cc264738
refitting.
Spark plug
• Thesparkplugshouldbecheckedregularly.
• Toaccessthesparkplug,undotheretainingscrewonthetopofthe
chainsaw body, and remove the cover. The spark plug can now be
removed using the spanner supplied.
• Theelectrodegapshouldbesetto0.65mm.
• Iftheplugappearstobefouled,orburnt,theengineisnotrunning
properly. Check for correct fuel mixture, and proper engine adjustment.
• Iftheelectrodeisheavilypitted,oreroded,replacethesparkplugwitha
new one of the same type.
• Alwaystightensparkplugproperlybeforeuse.
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, and shorten the machine’s service life.
• Thechainandcuttingbarshouldberegularlyremovedtoallowproper
cleaning of the chain oil feed ports.
• Cleanthebodyofyourmachinewithaclothanddetergent.
• Thefueltankcontainsalterthatshouldberegularlycleanedwithfresh
petrol.
• Theairltershouldberemovedandcleanedregularly.Toaccess
the filter, undo the retaining screw on the top of the chainsaw body,
and remove the cover. The air filter element should be cleaned using
household detergent, dried, and re-oiled with regular machine oil.
Reassemble before using the chainsaw.
Storage
• Allowthechainsawtocoolfullybeforepreparingforstorage.
• Drainoutallfuelandoil.
• Ifthechainsawistobestoredforanextendedperiod,wipeoverallmetal
surfaces with an oiled cloth. Remove the spark plug, and pour a small
amount of oil into the cylinder. Replace spark plug, and pull the starting
handle to distribute oil.
• Storethechainsawinaclean,dry,placeawayfromheatanddirect
sunlight. Ensure that the chainsaw is stored where children cannot get
access to it.
264738_instructions.indd 7 30/7/09 09:30:15