Instruction Manual

8
GB
Problem Possible cause Solution
No function when Variable Speed
Trigger Switch (9) is operated
No power Check power supply
Defective Variable Speed Trigger Switch
Have the Variable Speed Trigger Switch replaced by an authorised Silverline
service centre
Carbon brushes worn
Replace carbon brushes, or have the carbon brushes replaced by an
authorised Silverline service centre
Slow cutting performance
Saw blade not suitable for the material being cut Fit compatible saw blade
Saw blade blunt Fit new saw blade
Incorrect cutting speed Adjust cutting speed to match material requirements
Saw blade blunts quickly
Saw blade not suitable for the material being cut Fit compatible saw blade
Too much pressure exerted on to the tool Use less pressure whilst moving the machine
Cutting speed too fast Reduce cutting speeds to material requirements
No cutting fluid/cooling agent used when cutting metal Use a suitable cutting fluid when cutting metal
Troubleshooting
304583_Z1MANPRO1.indd 8 30/01/2014 09:51