Owner manual

6
GB
Before Use
• Carefullyunpackandinspectyourpowerdrill.Fullyfamiliariseyourself
with all features and functions of the tool.
• Ensurethatallpartsofyourpowerdrillarepresentandingoodcondition.
If any part is missing, or damaged, have such parts replaced before
attempting to use this tool.
Operating Instructions
Side handle
• TheSideHandle(2)shouldalwaysbeusedwhendrilling.
• Alwaysholdthedrillrmlyusingbothhands.
On/off switch
• Tostartthedrill,squeezetheOn/OffSwitch(4).
• Tostopthedrill,releasetheOn/OffSwitch.
Lock on button
• ThedrillisequippedwithaLockOnButton(5).Thisallowstheon/off
switch to be locked into the 'on' position for tasks that require extended
continuous running.
• Tousethelockonfunction,depressthelockonbuttonwhilstsqueezing
the on/off switch, the on/off switch can then be released and the drill
will continue to run.
• Tostopthedrill,squeezethenreleasetheon/offswitch.
Speed control
• Thespeedofthedrillcanbevariedbetween0and800rpm.
• ThespeedisadjustedbyrotatingtheSpeedControlDial(6).
Reversing
• ThedirectionofthedrillcanbechangedusingtheReverseSwitch(3).
• Torunthedrillinananti-clockwisedirection,pushthereverseswitchto
the right.
• Torunthedrillinaclockwisedirection,pushthereverseswitch
to the left.
• Donotattempttomovethereverseswitchwhilstthedrillisrunning.
• Donotattempttorunthedrillwiththereverseswitchinamidposition.
Maintenance and Disposal
Cleaning
• Disconnectthemachinefromthemainssupplybeforecleaning.
• Keepyourmachineclean.Alwayscleandustandparticlesaway,and
never allow ventilation holes to become blocked. Use a soft brush, or dry
cloth to clean the machine, if available blow through the ventilation holes
with clean, dry, compressed air.
Replacement brushes
• Overtime,thecarbonbrushesinthemotorwillwearaway.Thiswear
process will be accelerated if the machine is used in dusty environments,
or if the machine is overloaded.
• Ifthebrusheshavebecomeexcessivelyworn;motorperformancemay
decrease, the machine may fail to start, or excessive sparking may be
observed.
• Ifyoususpectthatthebrushesmaybeworn,havethemreplacedatan
authorised service centre.
Disposal
• Donotdisposeofpowertools,orotherwasteelectricalandelectronic
equipment (WEEE), with household waste.
•Contactyourlocalwastedisposalauthorityforinformationontheproper
way to dispose of power tools.
123557_Z1MANPRO1.indd 6 24/04/2013 09:48