Operation Manual

10
SSMS 600 C3
GB
IE
Operation
WARNING! RISK OF INJURY!
► Foodstuff s should not be too hot. Squirting contents may cause scalding.
NOTICE
► When you beat cream with the whisk 0 hold the container at a slant
during the beating. In this w
ay the cream will be thicker quicker. Ensure
that cream cannot be sprayed out of the container while it is being beaten.
When whipping cream, slide the speed regulator 1 to position "5".
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch 2 to process foodstuff s at the standard speed.
Slide the speed regulator 1 in the direction of “5” to increase the speed.
Slide the speed regulator 1 in the direction of “1” to reduce the speed.
3) Press and hold the turbo-switch 3 to process foodstuff s at a higher speed.
By pressing the turbo-switch 3 the maximum processing speed is available
immediately.
4) When you have completed the processing of the foodstuff s, simply release
the switch.
NOTICE
► Should unusual noises be heard during operation, such as squeaks or
similar
, lubricate the drive shaft of the blender with a few drops of neutral
cooking oil:
IB_102804_SSMS600C3_LB3.indb 10IB_102804_SSMS600C3_LB3.indb 10 28.08.14 15:5828.08.14 15:58