Operation Manual

SSL 6 A1
GB
│
IE
│
43 ■
Removing the peel-off polish
Ƈ Pull off the polish coat starting at the edges. If required, use the cuticle
pusher  as an aid.
NOTE
► The longer the polish coat remains on the nail, the easier it is to remove.
► If the polish coat is difficult to remove, polish your nails more smoothly
before the next treatment or apply a base coat of clear varnish.
► We recommend treating your nails between treatments with nail oil or
with nail hardener to prevent the nails from drying out.
Removing/attaching the base plate
You can remove the base plate of the UV appliance  for your pedicure.
Ƈ Remove the mains plug 3 from the mains power socket.
Ƈ Turn the UV appliance  upside down.
Ƈ Pull the four pins on the underside of the UV appliance  out until the
base plate can be removed.
Ƈ Plug the mains plug 3 into the mains socket. The UV appliance  is
ready for use.
To replace the base plate on the UV appliance , proceed as follows:
Ƈ Remove the mains plug 3 from the mains power socket.
Ƈ Pull out the four pins a little way if required.
Ƈ Position the base plate in the correct position and push the plugs into the
holes on the base plate. Push the pins back in.
Ƈ Plug the mains plug 3 into the mains socket if you want to use the UV
appliance  straight away.