Operation Manual

SSL 6 A1
■ 42
│
GB
│
IE


NOTE
► Make sure that you do not touch the walls of the UV appliance  with
the freshly painted nails.
► After curing in the UV appliance , the surface of the nail remains
slightly damp. Therefore, do not touch the nail surface and do not wipe
it. Rather, move on to the next step.
Ƈ Shake the bottle with the peel-off UV nail polish  and apply a thin
coat to your nails.

Ƈ Cure the peel-off UV nail polish for 60 seconds in the UV appliance
as described above.
NOTE
►
If you want thicker coverage, repeat the last two steps.
Ƈ Apply a thin coat of 2-in-1 coat to seal the peel-off UV nail polish .
Coat the nail tips if possible to optimise the durability of the polish.
Ƈ Cure the 2-in-1 coat  for 60 seconds in the UV appliance .
Ƈ Use a cleansing pad  to remove the sweating layer from the nail
surface.