Operation Manual
SSL 6 A1
GB
│
IE
│
39 ■
NOTE
► The UV lamps switch off automatically after the preset time has elapsed.
Ƈ To stop the treatment during operation, press the previously selected
time selection button (). The UV LEDs switch off, the operating
light lights up red.
Using the appliance
CAUTION
Risk of property damage due to the 2-in-1 coat and the
peel-off UV nail polish
The 2-in-1 coat and peel-off UV nail polish are very difficult to
remove from furniture surfaces, clothing and carpets.
► Before starting, cover the working area with paper or a towel.
NOTE
► Place the UV appliance on a covered, stable surface.
► Do not place the 2-in-1 coat and the peel-off UV nail polish in
the immediate proximity of the UV appliance .
► Do not expose the 2-in-1 coat and the peel-off UV nail polish to
direct sunlight.
► Close the 2-in-1 coat , the peel-off UV nail polish and the cleansing
pads after every use to prevent them from drying out.
Preparing your nails
NOTE
► The gel nails starter kitshould not be used on artificial nails or gel nails
because the peel-off effect will be impaired. If you do this, the polish
coat must be filed off as with normal nail gel.
► Clean and dry your hands before use. We recommend washing your
hands at least 15–20 minutes before the treatment to ensure no
moisture remains on your nails.
► Do not use any hand cream or similar before the application, as the nail
surface must be completely free of oils to ensure optimal adhesion of
the polish coat.
► To ensure a better peel-off effect, you can apply a base coat of clear
varnish to your nails.