Operation Manual

SSL 6 A1
■ 38
│
GB
│
IE
Unpacking
DANGER
► Do not allow children to play with packaging materials. There is a risk
of suffocation.
Ƈ Remove all parts and the operating instructions from the box.
Ƈ Remove all packaging materials and any protective films from the appliance.
Requirements for the set-up location
For safe and trouble-free operation of the UV appliance , the set-up location
must fulfil the following requirements:
■ Place the UV appliance  on a stable, horizontal and dry surface.
■ Do not set up the UV appliance  in a wet environment or anywhere it
will be exposed to splashes.
■ Do not set up the UV appliance  directly next to a radiator or electric fire.
■ The mains power socket must be easily accessible so that the mains plug
3 can easily be pulled out in an emergency.
Handling and operation
Switching the UV appliance on/off
Ƈ Connect the barrel plug !of the mains plug 3with the socket on
the UV appliance and plug the mains plug 3into a mains socket.
The operating light  lights up red, operating lamp of the 10 s button
lights up blue.
Ƈ To switch off the UV appliance  completely, pull the mains plug3
from the mains power socket.
Functions
Three different treatment times can be set on the UV appliance :
■ 60 seconds
■ 30 seconds
■ 10 seconds
Ƈ Press the 10 s, 30 s or 60 s button () and the UV LEDs switch
on. The operating light lights up green during the treatment, operating
lightof the respective time selection button () lights up blue.
Ƈ During operation, if you want to select a different treatment time, press
the respective time selection button () twice.