Operation Manual

37
SRK 400 A1
GB
– ... there is no moisture or rice on the outside of the cooking bowl 0 - this
will prevent soiling of the cooking area. If necessary, wipe the outside
with a clean cloth.
– ... the cooking bowl 0 is not sk
ewed or tilted when being placed in the
rice cooker housing. Always insert the cooking bowl 0 correctly and
precisely into the rice cooker housing. Otherwise, the safety shut-off of
the appliance may trigger and the appliance will not allow itself to be
switched on.
5) Now close the lid.
6) Connect the power cable 5 to the socket 8 and insert the mains plug into
the power socket.
7) Press down the function selector switch 7 and cook the rice for the amount
of time specifi ed on the rice packet.
8) When the rice is ready:
– If you want to eat the rice immediately, disconnect the plug from the
mains po
wer socket.
– If you wish to keep the rice warm (max. 2 hours), press the function
selector switch 7 upw
ards.
9) Disconnect the plug from the mains power socket when the rice has been
removed.
NOTE
► Some types of easy-cook rice still have to swell after cooking. Always
follo
w the preparation instructions on the packaging of the rice.
CAUTION - PROPERTY DAMAGE!
► Use only the supplied plastic spoon to remove the rice w. Other spoons
may cause damage to the anti-stick coating of the cooking bo
wl 0.
NOTE
► You can insert the plastic spoon w into the br
acket at the edge of the rice
cooker. This is always ready to hand!
Preparing rice that has not been pretreated
NOTE
► Coat the inside of the cooking bowl 0 e
venly with a little fat or vegetable
oil to achieve a better cooking result.
1) Open the lid by pressing the release 2 and lifting the lid simultaneously.