Operation Manual

■ 40
│
GB
│
IE SPDP 18 A1
Playback of JPEG files
♦ Highlight an image with the navigation keys 

and press
ENTER

or PLAY/PAUSE 

to open the image. The image
is displayed on the screen. The view then changes to the next
image on the disc or in the folder.
♦ To display the currently displayed image longer, press
PLAY/PAUSE


.
♦ To resume playback, press PLAY/PAUSE


again.
♦ You can display an image directly by entering the file number
of the image using the numbers on the numeric keypad

and
confirming your selection with ENTER

.
♦ You can use the navigation keys


to rotate the image in 90°
increments during playback.
♦ Use the navigation keys


to flip the image horizontally or
vertically during playback.
♦ During playback, press the STOP

button


to display a thumb-
nail preview of all images in the folder or on the disc. Each page
displays 12 thumbnails.
♦ Select an image with the navigation keys


and start
playback with ENTER

or PLAY/PAUSE 

.
♦ Use the navigation keys
 

to select one of the
following entries from the bottom of the menu and confirm with
ENTER

.
Slide Show: Starts a slide show of the images in the folder or on the
disc.
Menu: Displays available button functions for JPEG playback.
Press ENTER

until this overview is hidden.
Previous: Goes back to the previous page
Next: Goes to the next page
♦ Press the MENUbutton

to return to the file list
Select slide show transitions:
You can select different transitions to switch from one image to the
next.
♦ During the slide show, press the PROGRAMbutton

until the
name of the desired transition appears in the upper left corner of
the screen.
Troubleshooting
No function in battery mode
– The built-in battery may be discharged. Connect the mains
adapter

or the car adapter

and charge the battery.
Display shows "No Disc" despite the fact that a disc has been
inserted
– Check whether the disc has been inserted with the label side
facing up.
– The disc is dirty, scratched or damaged. Clean the disc or insert
a different disc.
The remote control does not work
– Check that the batteries have been inserted into the battery
compartment of the remote control
C
the right way round
(check the polarity).
– Check whether the batteries of the remote control
C
are dis-
charged and replace both batteries if necessary.
– Make sure that there are no obstacles between the remote
control
C
and sensor

of the DVD player
A
.
– Reduce the distance between the remote control
C
and the
DVD player
A
(max. 5 m).
No image on the second monitor
– Check that all connecting cables between the
DVD player
A
and the second monitor
B
are firmly plugged
into the appropriate sockets.
– Check whether the second monitor
B
is switched on
(ON/OFF switch

is in the ON position).
– Check whether the screen

of the second monitor
B
is
switched on (press the TFT OFF button

).
No sound
– Check to see if the DVD player
A
is muted.
– Check to see if the main volume control
,
is set to minimum.