Operation Manual

GB
│
IE
│
35 ■SPDP 18 A1
Repeat section
♦ During playback press the A-Bbutton

to set the beginning of
the section that you want to repeat.
A is displayed on the
screen.
♦ Press button A-B

a second time to set the end of the section.
The A-B symbol appears permanently on the screen and the
specified section is repeated endlessly.
♦ Press the A-Bbutton

again to return to normal playback.
Programming the playback order of tracks
With this programming function you can play up to 20 chapters (DVD)
or tracks (audio CD) in an order of your choosing. This function is not
available for MP3 media.
♦ Press the PROGRAMbutton

. A table with 10 program positions
appears on the screen.
T T:
T
T:
T
T:
T
T:
CH:
CH:
CH:
CH:
T
T:
T
T:
T
T:
T
T:
CH:
T
T: CH:
CH:
CH:
CH:
01
02
03
04
05
06
07
08
09
10
T T: CH:
Exit
Next
♦ Enter the desired track (TT) for program position 1 using the num-
bers on the numeric keypad

. To enter two-digit numbers press
10+ repeatedly for the tens, then a numeric key for the second
digit.
♦ Enter the desired chapter (CH) for program position 1 using the
numbers on the numeric keypad

.
♦ After input, the cursor jumps to the next program position.
♦ Enter additional program positions in the same way. To enter 10
additional program positions, move the cursor to the "Next
"
entry at the bottom of the menu using the navigation keys



and confirm with the ENTERbutton

.
♦ If you select the "Exit" entry at the bottom of the menu, the pro-
gramming function is aborted. All settings will be lost.
Starting a programmed playback sequence
As soon as the first program position has been entered, the word
"Start" appears at the bottom of the menu.
♦ Use the navigation keys



to move the cursor to "Start"
and press the PLAY/PAUSE
button

or ENTER

.
The preprogrammed playback sequence starts and "Program" is
permanently displayed on the screen during playback.
♦ Use the PROGRAMbutton

to call up and change the table
with the program positions again.
♦ To stop playback and clear the programmed playback order, press
the STOP
button


twice.
At the end of the programmed playback sequence, the DVD player
A
automatically switches to stop mode. The previously programmed
playback sequence is not saved.
Opening the DVD menu
Many DVD films contain a main menu on the disc with several options
besides the option to play the main film, e.g. playback of bonus
material.
Please note that it depends on the DVD which menu is displayed when
a key is pressed.
♦ Pressing the MENUbutton

usually calls up the main menu of
the DVD.
♦ Pressing the TITLEbutton

usually opens the DVD title menu.
Menu functions
Navigating the menus
♦ Press the SETUPbutton

to enter the setup menu. The General
Setup page appears.
Use the navigation keys



and the ENTERbutton

to
adjust all the settings in the menu.
– Use the navigation keys
to select a menu by moving the
yellow marking under the corresponding menu symbol.
– Use the navigation keys to select an item in a menu by
moving the green bar over the item.
– Use the navigation key to switch to the submenu of an entry
and the navigation key to go back one menu level.
– To confirm a selection, press the ENTERbutton

.
– To exit the setup menu, press the SETUPbutton

.