Operation Manual

■ 32
│
GB
│
IE SPDP 18 A1
Switching the screen on/off
During audio playback, you can separately switch the screen on the
DVD player
A
and the second monitor
B
on or off. The sound will
still be transmitted.
♦ Press the DISPLAY ON/OFFbutton

to switch the DVD player
A
screen on or off.
♦ Press the TFT OFFbutton

to switch the screen on the second
monitor
B
on or off.
Inserting/connecting a data medium
Inserting a DVD/CD
♦ Slide the disc compartment release OPEN
.
on top of the
DVD player
A
to the left and fold the screen

forward to open
the disc tray.
♦ Insert the DVD/CD so that the label side is facing up and press it
carefully onto the retaining hub in the middle until the DVD/CD
clicks into place.
♦ To close the disc compartment, gently push the screen

back until
you hear it click into place.
DVD/CD playback normally starts automatically after a few seconds.
You may need to press the PLAY/PAUSE
button

or a menu
may appear asking you to make a selection using the navigation keys



.
Connecting a USB flash drive
You can connect a USB flash drive to the USB port
1
to play audio,
video, or image files.
CAUTION
► To avoid damaging the device, do not use a USB extension
cable and do not connect the device directly to the USB port of
a computer.
► The USB port is designed for use with USB flash drives only.
Other external storage media, such as external hard drives,
cannot be operated via the USB port.
♦ Insert a USB flash drive into the USB port
1
on the right side of
the DVD player
A
to play files from the USB flash drive.
Connecting SD/MMC memory cards
You can insert an SD/MMC memory card into the memory card slot
4
to play back audio, video, or image files.
♦ Insert the memory card into the memory card slot
4
on the right
side of the DVD player
A
with the contacts to the rear and the
bevelled corner at the top.
Selecting the playback source
The default playback source of the device is DVD. If other media (USB
flash drive or SD/MMC memory card) are inserted, you can switch
between the playback sources.
♦ Press the SOURCEbutton

repeatedly to switch between the
playback sources (DVD, USB and SD). When the DVD drive is
selected as the playback source, "DVD" or "CD" is displayed at the
top left of the screen after the data is read.
Adjusting the volume/muting
The main volume control
,
, which controls the overall volume of the
AV OUT socket
2
, the headphone jack
(
and the speaker

, is
located on the side of the DVD player
A
. If the main volume con-
trol
,
is set to minimum, no sound will be emitted or transmitted to the
second monitor
B
.
♦ Set the main volume control
,
to maximum to maintain the full
volume range of the device.
♦ Then adjust the volume using the VOL


and VOL 

buttons on the remote control
C
or directly on the device with the
VOL 
%
and VOL 
&
buttons. Changing the volume on the
DVD player
A
also affects the volume on the second monitor
B
.
♦ To adjust the volume of the second monitor
B
separately,
use either the volume control

or the VOL 

and
VOL 

buttons.
NOTE
► Press the VOL
(
%
,

) button to adjust the volume of the DVD
player
A
up to "16". A message will appear to warn you of
possible hearing damage at high volume. You cannot increase
the volume up to "20" until you have confirmed this message
with the ENTERbutton

or the OKbutton
'
.
♦ Press MUTEbutton

to mute the sound on the DVD player
A
and the second monitor
B
.
♦ Press the MUTEbutton

again to cancel the mute function.