Operation Manual

SPBD 5000 A1
■ 14 │ GB│IE│NI
Troubleshooting
The power bank does not charge
♦ Connection may be faulty. Check the connection.
A connected device will not charge
♦ The integrated battery is empty. Charge the battery.
♦ No connection to the device. Check the connection.
♦ Press the ON/OFF button briefl y to start the charging
process.
♦ The charging current of the connected device is too low
(< 80 mA) or too high (> 2.1 A).
NOTE
► If you cannot solve the problem with the above-men-
tioned solutions, please contact the Service Hotline
(see section Service).