Operation Manual

21
SNS 45 A3
GB
IE
NOTICE
►
Should any UV Gel a inadvertantly come onto the cuticle or the nail bed,
remove it before the hardening, for example, with a cotton wool swab.
Ƈ Repeat the above process for all nails.
e
i
NOTICE
►
Ensure that the nail is covered evenly with UV Gel a.
Hardening of the UV-Gel
NOTICE
►
See also the chapter Handling and operation.
Ƈ Switch the UV appliance 1 on with the ON/OFF switch 2.
Ƈ Press the Start button 0; the UV Lamps will be switched on.
Ƈ Now select the desired treatment time and then press the appropriate time
preselect button 9, 7 or 5. For the fi rst hardening we recommend the time
setting of 240 seconds.
Ƈ Hold your hand with the nails upward for the duration of the set treatment
time in the opening of the UV appliance 1.
Ƈ Treat the thumbnail separately because, when you hold your hand in the UV
unit, the UV light only shines on the side of it.
Ƈ Repeat the application of the UV gel a and the hardening in the UV appli-
ance 1 as described above once more.
IB_100059_SNS45A3_FI_SE_DK_NL.indb 21 17.06.14 16:47