Operation Manual
15
SMW 800 C3
GB
IE
Automatic menu
For foods that are prepared in the Automatic menu 
modus, it is not necessary to programme in the dur- 
ation of the cooking process and the power level. 
You only need to enter the type of food you wish to 
cook and its weight.
 WARNING! RISK OF INJURY!
 ► The cooking utensils and the food may be 
very hot after cooking! Use oven gloves or 
similar to remove the food from the micro-
wave!
 WARNING! RISK OF FIRE!
When using programmes with incorporated grill  
function (programme nos. 4, 7 and 8), you should 
not use any form of covering or cookware that is 
not heat resistant, as these could melt or ignite!
NOTE
The microwave calculates the time/output 
level for fresh foods. Frozen foods will not be 
adequately cooked with the times programmed 
into the microwave.
If required, defrost frozen foods using the defrost 
programme beforehand (see section "Defrosting").
Starting the Automatic Menu
NOTE
Always place the food item in a suitable container 
or on a plate. Bear in mind that liquids such as 
grease, etc. can drain from the food during the 
cooking or heating process. The container/plate 
should therefore be large enough to avoid the 
overflowing of liquids.
1)  Turn the control dial  slowly to the left. A 
number (e.g. “A-02” for Auto Programme 2 
(fish)) appears on the display , and the “Fish” 
icon flashes. Select the appropriate automatic 
menu for your foodstuff (1 to 9). After you have 
selected automatic menu mode, you can also 
access the desired automatic menu with a clock-
wise rotation. Confirm your selection by pressing 
the Start/Quick Start button  
.
no. Symbol Food
Weight 
(millilitres)
1
Pasta 100–300 g
2
Fish 100–1000 g
3
Rice 100–1000 g
4
Chicken 800–1400 g
5
Heating 
up
100–1000 g
6
Potatoes 150–600 g
7
Roasting 300–1300 g
8
Kebabs 100–700 g
9
Beverages 200–600 ml
2)  You can now set the desired weight/number 
of servings by rotating the control dial . 
3)  Press Start/Quick start  
 to start the 
cooking process.
4)  When the cooking/grill process is complete, 
“End” appears on the display  and you will 
hear 4 beeps. 
If the door of the microwave is not opened, the 
appliance beeps again after about 2 minutes.










