Operation Manual

SilverCrest SMBC 30 A1
English - 47
To play an Audio CD, proceed as follows:
 Press the Open/close CD tray button [3] on the Micro Stereo System or the
Open/close CD tray button [29] on the remote control to open the CD tray [1].
 Insert an Audio CD into the CD tray [1].
 Press the Open/close CD tray button [3] on the Micro Stereo System or the
Open/close CD tray button [29] on the remote control to close the CD tray [1]. The
number of tracks on the Audio CD is shown briefly on the display [2]. Then the first track is
played back automatically. Press the INFO button [28] during playback to show the Audio
CD total playback time for a few seconds on the display [2].
Instead of an Audio CD you can also use a MP3 CD. When using a MP3 CD,
please note the button functions described in chapter “9.7. USB”.
The following buttons can be used for this operating mode:
Button Function
Play/Pause [6] or Play/Pause [50]
Playback
Play/Pause [6] or Play/Pause [50]
Pause
Stop [5] or Stop [36]
Stop
▸l [7] or ▸▸l [37]
Next title
l◂ [8] or l◂◂ [51]
Previous title
Keep ▸l [7] or ▸▸l [37] pressed
Fast forward
Keep l◂ [8] or l◂◂ [51] pressed
Rewind
Random playback [46]
Random playback on/off
Press Repeat [47] or MOD [14] once
Repeat playback – 1 title
Press Repeat [47] or MOD [14] twice
Repeat playback – full CD
Press Repeat [47] three times
Repeat off
Press MOD [14] three times
Random playback on
Press MOD [14] four times
Random playback off
INTRO [49]
INTRO function (all titles on the CD are
played for the first 10 seconds)
Numeric buttons [30]
Direct title selection