Operation Manual

GB│MT51
SHMS 300 C2
NOTE
If the blender ! still cannot be removed from
the blender socket
, pull the safety catch
open a little. Then the blender ! can be
removed.
Cleaning
DANGER –
RISK OF ELECTRICAL SHOCK!
Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the hand element - in
water or other liquids!
WARNING! RISK OF INJURY!
Take care when cleaning the blender !!
The blade is extremely sharp!
Never submerge the blender ! completely
under water. Clean only the lower part with
the blade under running water. Otherwise,
the appliance could be irreparably damaged.
Clean the hand element - containing the motor
using a damp cloth only; if necessary, add a
little mild detergent.
Clean the mixer stand using a damp cloth
only; if necessary, add a little mild detergent.
The whisks . and the kneading hooks 0 can
be cleaned under running water or in warm
water with detergent. Dry all parts thoroughly
after cleaning.
We recommend cleaning the attachments directly
after use. This removes food residue and reduces
the risk of bacterial contamination.
NOTE
The whisks
.
and the kneading
hooks
0
can also be cleaned in the
dishwasher.
Clean the mixing bowl , the lid , the dough
scraper 6 in warm water with a little washing-up
liquid.
NOTE
You can also wash the mixing bowl
,
the lid
and the dough scraper
6
in the dishwasher. If possible, place
everything in the top basket of the
dishwasher.
Clean the lower part of the blender ! in warm
water with a little detergent or under running
water. Wipe the upper part with a damp cloth.
If necessary, add a little mild detergent onto the
cloth. Afterwards, wipe off with a cloth moistened
only with water to ensure that no detergent
remains on the appliance.
ATTENTION! PROPERTY DAMAGE!
Clean only the lower section of the blender !
under running water. Do not allow water to
get inside the blender !. This could result in
damage to the appliance.
Storage
Store the cleaned appliance in a clean, dust-free
and dry location.