Operation Manual

64
SFS 150 B3
GB
♦ Open the appliance lid by pressing the lid releases to the top.
♦ Place a bag opening on the sealing wire . To ensure that the bag is fi xed
in place and does not slip, place the end of the bag below the suction con-
nectors
. For this you can lift them slightly. The bag needs to extend up to
the marking "Seal", which is marked on the appliance.
NOTICE
►
The bag opening must lie smoothly on the sealing wire . Otherwise, the
sealing does not function properly.
♦ Close the appliance lid and, using both hands, press the sealing button .
The indication lamp glows.
♦ Hold the sealing button pressed down until the indication lamp
extinguishes.
IB_71770_SFS150B3_LB2.indb Abs2:64IB_71770_SFS150B3_LB2.indb Abs2:64 15.02.12 13:2415.02.12 13:24