Operation Manual

62
SFS 150 B3
GB
Requirements on the installation site
For safe and fl awless operation of the appliance, the installation site must comply
with the following requirements:
■ When setting it up, place the appliance on a fi rm, fl at and horizontal
surface.
■ Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
IMPORTANT
►
Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
This data must match in order to avoid any damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
♦ Insert the plug into a mains power socket.
Appliance description
Collection container
Suction connector
Sealing wire
Cutting device
Roll storage compartment
Guide rail
Indication lamp (red)
Lid release
Sealing button
IB_71770_SFS150B3_LB2.indb Abs2:62IB_71770_SFS150B3_LB2.indb Abs2:62 15.02.12 13:2415.02.12 13:24