Operation Manual

SFA 40 A1
■ 16
│
GB
│
IE
Accepting/ending a call
When there is an incoming call, the operating LED flashes blue
every 3 seconds and you can hear a ring tone over the hands-free
set. Even if the call tone is switched off on your mobile phone, you
will still hear the ring tone via the hands-free set.
♦ Press the multifunction button
once briefly to accept
the call.
♦ Press the multifunction button
once briefly to finish the
ongoing call.
Handing over a call between hands-free set and
mobile phone
During a call you can hand over a call between the hands-free set
and the mobile phone.
♦ Press the
button and the button simultaneously during
a call. You will hear a beep and the call will be transferred to
the mobile phone.
♦ Pressing the
button and the button again will transfer
the call back to the hands-free set.
Manage calls
If you have connected two mobile phones to the hands-free set simul-
taneously, you can put one call on hold in order to take a call from a
second mobile phone and to toggle between the two calls.
♦ Press the multifunction button
twice briefly to accept
the call on the second mobile phone while talking on the first
mobile phone. The first call is put on hold.