Operation Manual

SFA 40 A1
GB
│
IE
│
15 ■
Activating/deactivating the multipoint function
The multipoint function is activated by default on delivery.
To disable the multipoint function:
♦ In standby mode, press the
button for approx. 3 seconds.
The operating LED lights up briefly orange before going
out completely. You will hear a low beep, followed by a series
of beeps decreasing in pitch. The hands-free set switches off
and multiple mobile phones can no longer be paired with the
device.
To enable the multipoint function:
♦ In standby mode, press the
button for approx. 3 seconds.
You will hear a rising series of beeps. The hands-free set can
now be paired with several mobile phones.
Call function
♦ Use your mobile phone to make a call in the usual way.
♦ To redial the last used number, press the multifunction button
twice in quick succession.
♦ To activate voice dialling, press the multifunction button
once briefly.
NOTE
► Voice dialling is only available with mobile phones that support
this function. For more information on voice dialling, refer to the
instruction manual of your mobile phone.