Operation Manual

GB
12
SED 3.7 D2
Cleaning and Care
RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains
power adapter  and the mains power adapter  from the
main power supply.
WARNING - PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use clean the epilator head  with the supplied
cleaning brush to remove loose hairs.
■ Disinfect the epilator head  regularly by spraying and cleaning
it with disinfectant spray.
■ To thoroughly clean the epilator head  you can remove it from
the appliance:
― Press the two restraint fixtures  together and at the same
time pull the epilator head  upwards.
― Clean the epilator head  under running water and then
allow it to dry.
― Place the epilator head  back onto the appliance. Ensure
that the gears on the epilator head  and on the appliance
mesh with each other. The epilator head  must audibly
engage.
■ Clean the appliance housing and the mains power adapter 
with a moist cloth. If required, use some mild detergent on the cloth.
Ensure that the appliance is completely dry before the next use.