Operation Manual

GB
8
SED 3.7 D2
WARNING - PROPERTY DAMAGE!
► Use the appliance only indoors.
Mains power operation
1) Insert the connector plug of the mains power adapter  into the
socket for mains adapter  on the appliance. Ensure that the
speed switch  is set at “0”.
2) Connect the mains power adapter  to a mains power socket.
The control lamp  glows red to indicate that the charging
process is active.
The appliance is ready for immediate use.
Battery operation
1) Insert the connector plug of the mains power adapter  into the
socket for mains adapter  on the appliance. Ensure that the
speed switch  is set at “0”.
2) Connect the mains power adapter  to a mains power socket.
The control lamp  glows red to indicate that the charging
process is active.
As soon as the control lamp  glows green the appliance is fully
charged and you can disconnect it from the mains power supply.
NOTICE
► For the initial charging, the appliance requires about
80 minutes to fully charge.
► First recharge the appliance when the control lamps  indi-
cate, by alternately flashing red and green, that the battery
charge level is low..