Operation Manual

■ 12
│
GB
│
IE
│
NI
│
CY
SDM 1500 C2
Cleaning and care
RISK OF ELECTRIC SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE
► When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects.
■ Empty the water tank 8 after every use.
■ After each use, remove the pad 6/o from the steam foot 5 and wash it out.
■ Note the following washing instructions when you wash the pad 6/o in
the washing machine:
Wash at max. 60°C
Do not tumble dry
Do not iron
■ If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.
Maintenance/changing the filter
After 4–6 months or approximately 100 cleaning cycles (one cycle corresponds
to one water tank filling), you will need to change the filter 7. Please contact
our Service Department for replacement filters.
RISK OF ELECTRIC SHOCK!
► Before changing the filter 7, always pull out the mains plug!
1) To remove the filter 7, first remove the water tank 8 from the appliance.
2) Pull the filter 7 upwards out of the appliance.
3) Insert the new filter 7.
4) Replace the water tank 8.