Operation Manual

■ 8

│

SDM 1500 C2

Disposal of packaging materials

The packaging protects the appliance from damage during transport. The packaging

materials have been selected for their environmental friendliness and ease of

disposal, and are therefore recyclable.

Returning the packaging into the material cycle conserves raw materials and

reduces the amount of waste generated. Dispose of packaging materials that

are no longer needed in accordance with applicable local regulations.

NOTE

► If possible, keep the appliance's original packaging during the warranty

period so that the appliance can be packed properly for return shipment

in the event of a warranty claim.

Note the labelling on the packaging and separate the packaging material compo-

nents for disposal if necessary. The packaging material is labelled with abbreviations

(b) and numbers (a) with the following meanings:

1–7: Plastics

20–22: Paper and cardboard

80–98: Composites

Assembling the appliance

♦ Push the main unit 3 onto the connection nozzle 4 on the steam foot 5 and

press the main unit 3 down until the round catch clicks into place.

♦ Select the appropriate pad 6/o for the surface being cleaned:

– the blue pad o for sensitive surfaces, such as parquet ﬂooring,

– the white pad 6 for more robust surfaces, such as tiled ﬂoors.

♦ Attach a pad 6 from below onto the steam foot 5.

NOTE

► If you intend to clean carpeting with the steam mop, ﬁt the steam foot 5

onto the carpet ring p. Ensure that the carpet ring unlocking aid a is in

line with the connection nozzle 4. Push the steam foot 5 onto the carpet

ring p so that it clicks audibly into place. This will allow the pad 6/o to

glide over the carpet.

► To remove the carpet ring p, press your foot onto the carpet ring release

aid a and pull the steam foot 5 carefully oﬀ the carpet ring p.