Operation Manual

SilverCrest SDKC 5.00 A1
English -29
The following flash settings are available:
Icon
Description
The flash is always on.
The flash is automatically activated when the conditions for
taking photos require additional lighting.
The flash is turned off. It will not activate itself in darkness.
Using frames
The camera gives you the possibility to directly add frames to your
photos. When in Photo Mode proceed as follows to use a frame:
 Press the Capture Mode button [3] once, to select the "Photos
with Frames" mode.
 There are 8 different frames available in this mode which can
be selected one after the other by pressing the on/off button
[2].
 Point the camera at the desired subject and check on the
display [10], whether the image content is captured to your
liking.
 Press the shutter release to take a picture with a frame.