Operation Manual

SDK 2500 A1

CAUTION - RISK OF FIRE!

► Never leave the appliance unattended while it is being used.

► When the appliance is in use ensure that there are no easily inﬂammable

materials close to it (e.g. dishcloths, oven cloths etc.).

► If you do not intend to use the appliance for an extended period, you must

disconnect it from the power source. The appliance is only completely with-

out current when the power plug has been pulled out of the socket.

Setting up and connecting

1) Place the appliance on a stable, level and heat-resistant surface.

2) Insert the plug into a mains power socket.

3) Switch the appliance on by switching the On/Oﬀ switch  to the position “I”.

4) Switch both hobs / to MAX and allow these to heat up for around 3 min-

utes without a saucepan.

This can cause slight smoke development since the protective coating which has

been applied will burn in. Ensure there is suﬃcient ventilation. For example, open

a window.

5) Switch oﬀ the hobs / after 3 minutes.

Energy-eﬃcient cooking

■ Use cooking pots with the same diameter as the respective hob /. If you use

particularly small pots that do not cover the whole hob /, a great deal of

energy is simply wasted.

■ Ensure that the pots/pans rest ﬂat on the hobs /. Dented or uneven bottoms

prevent optimum heat conduction.

■ To save energy, you can turn oﬀ the hob / before you have completely

ﬁnished cooking. The residual heat of the hob / is usually suﬃcient to ﬁnish

cooking the food.