Operation Manual
7
GB
4. Items supplied
1 steam iron
1 measuring beaker|19
1 set of operating instructions
5. Before using for the
first time
1. Ensure that you have pulled out the
mains plug|10.
2. Open the lid|2 (of the water tank).
3. Pour water into the measuring beaker|19
and half-fill the water tank|13.
4. Insert the mains plug into a wall sock-
et|10 corresponding to the technical
data.
5. Set the temperature controller|15 to
MAX.
The temperature control lamp |7
lights up.
6. When the device has reached the de-
sired temperature (temperature control
lamp |7 goes out), iron an old cotton
cloth in steam mode until the water
tank|13 is empty.
6. Operation
DANGER!
~ The sole plate|18 becomes very hot
during operation. During operation
touch only the handle|8 and the control
elements of the steam iron.
~ Even during short interruptions, always
place the steam iron on the base
unit|12 and never on its sole plate|18.
There is a fire hazard!
NOTES:
• Not all materials are suitable for iron-
ing. Follow the care instructions, e.g. in-
side the clothing.
• You may notice an odour when using
for the first time. This is a result of the
manufacturing process and is not a de-
fect with the device. Ensure adequate
ventilation.
The sole plate|18 cools down slightly during
ironing. In order to reach the set temperature
again, the device heats the sole plate|18 up
again, during which the temperature control
lamp |7 is lit. The temperature control
lamp |7 goes out again when the set tem-
perature is reached. This process repeats it-
self during ironing.
Simply continue ironing during the heating
phase.
BB1$6B%XHJHOHLVHQB%ERRN6HLWH)UHLWDJ2NWREHU