Operation Manual

9
GB
7. Finish ironing, set the temperature con-
troller|15 to MIN and pull out the
mains plug|10.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank|13 through the filling open-
ing in the water tank (under the lid|2).
6.5 Ironing with steam
Steam ironing requires a high temperature,
at least the temperature setting for . In or-
der to additionally dampen items of cloth-
ing, the spray function is also available.
1. Set the steam flow rate control|3 to
and set the temperature controller|15 to
MIN.
2. Fill the water tank|13.
3. Place the steam iron on the base unit|12.
4. Connect the mains plug|10 with the
wall socket.
5. Set the temperature controller|15 to the
desired temperature (at least ). The
temperature control lamp |7 lights
up.
6. As soon as the ironing temperature has
been reached and the temperature control
lamp |7 goes out, adjust the steam
flow rate controller|3 to the desired steam
flow rate and start ironing.
The steam will ...
… start to come out as soon as you hold
the steam iron horizontal, and
… stop as soon as:
- you hold the steam iron vertically,
- you place the steam iron on the base
unit|12,
- the temperature is too low,
- the water tank|13 is empty
or
- you set the steam flow rate control-
ler|3 to .
7. Finish ironing, set the temperature con-
troller|15 to MIN, set the steam flow
rate controller|3 to and pull out the
mains plug|10.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank|13 through the filling open-
ing in the water tank (under the lid|2).
6.6 Steam jet function
The steam jet function requires a high tem-
perature. Select a temperature setting be-
tween and MAX. For this purpose, the
water tank|13 must be at least one quarter
full. The steam flow rate controller|3 is locat-
ed to the left on the symbol .
• Press the steam jet button while the
steam iron glides over the item of laun-
dry|4 .
• Wait a few seconds before you press
the steam jet button|4 again.
NOTE:
• For smoothing items of clothing that are
hanging up, you can use the steam jet
Button in a vertical position.
7. Safety shut-off
DANGER! - Fire hazard!
Despite the automatic switch-off, the
steam iron must not be left
unsupervised.
Your steam iron possesses a safety shut-off of
the heating function (AUTO SHUT OFF).
Activating the function
7he automatic switch-off occurs, if
- the device has stood still in vertical posi-
tion for approx. 8 minutes.
- the device has stood still on the sole
plate for approx. 30 seconds.
- the device has laid on its side for ap-
prox. 30 seconds.
BB1$6B%XHJHOHLVHQB%ERRN6HLWH)UHLWDJ2NWREHU