Operation Manual

GB
│
IE │ 35 ■
SDB 1500 B2
Reinsert the rotary brush "B":
DC
Fig. 2
6) Push the side of the rotary brush "B" with the recess "C" onto the drive shaft
"D" (see Fig. 2).
7) Push the other end of the rotary brush "B" into the housing so that the rotary
brush "B" sits straight in the housing again.
8) Reinsert locking device "A" and let it click into place.
Replacing the filter
After 4–6 months, or approximately 100 cleaning cycles (one cycle corresponds
to one water tank filling), you will need to change the filter . Please contact
our Service Department for replacement filters.
RISK OF ELECTRICAL SHOCK!
► Before changing the filter , always pull out the mains plug!
To remove the filter , first remove the water tank  from the appliance.
9) Pull the filter  upwards out of the appliance.
10) Insert the new filter .
11) Replace the water tank .