Operation Manual

GB
│
IE │ 33 ■
SDB 1500 B2
After use
1) Allow the appliance to cool down.
2) Remove the pad for hard floors  or the pad for soft floors .
3) Remove the water tank  from the appliance and empty it.
4) Pull the upper cable hook % out a little and turn it back upwards. Wind the
cable around the two cable hooks %/,.
Fix the end of the power cable using the cable clip on the cable.
5) Pull the dust container upwards out of the steam broom and empty the
dust container . Reinsert the dust container  into the steam broom .
Cleaning and maintenance
RISK OF ELECTRICAL SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE
► Do not use abrasive or chemical cleaners, nor pointed or scratchy objects
to clean the appliance's surfaces.
■ Empty the water tank  after every use.
■ After each use, remove the pad / from the steam broom  and wash
it out.
■ Note the following washing instructions when you wash the pads / in
the washing machine:
Wash at max. 60°C
Do not tumble dry
Do not iron
Do not bleach
■ If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.