Operation Manual

SBT 1.5 A1

■ 30

│

6) Place the rotating blades

centred into the cutting head cover ,

so that the rotating blades

rest against the cutting head cover .

7) Push the connecting piece

into the cutting head housing . The

protruding spacer of the connecting piece must point towards

you (see ﬁg. 1). Ensure that the indentations on the cutting head

cover slide into the catches on the inside of the cutting head

cover

8) Push the connecting piece

ﬁrmly downwards so that it clicks

into place and sits tightly.

9) Replace the shaving head  on the housing and turn the shaving

head  in the direction of the arrow

until the marking on

the shaving head points to the marking on the housing.

10) Replace the protective cap  on the housing.

Storage

■ Always protect the shaving head  with the supplied protective

cap .

■ Store the appliance in a dry and dust-free location.

Troubleshooting

The appliance is not working:

■ Replace the battery.

■ The appliance is defective. Contact the Customer Service department.

Not all hairs are plucked:

■ You are working too fast. Move the appliance over your skin slowly.