Operation Manual

SBT 1.5 A1

│

29 ■

1) Remove the shaving head  as described in the section “Removing

and cleaning the shaving head”.

2) Press the parts of the cutting head out towards the open side of

the shaving head housing

3) Clean the individual parts carefully under running water.

4) Leave the parts to dry thoroughly.

5) To re-assemble, insert the cutting head cover

into the shaving

head housing so that the indentations on the cutting head

cover slide into the catches on the inside of the cutting head

cover (see ﬁg. 1).

Fig. 1