Specifications

SilverCrest MN10 Notebook Mini-Mouse English

Insert the batteries supplied, type AAA, with

the polarities correctly positioned (note and

match + and – symbols) in the mini-mouse

and push the battery cover back onto the

mouse.

The polarity positions of the batteries to be

inserted are indicated by corresponding

markings in the battery compartment.

Step 2 – Connect USB receiver

1. Plug the supplied USB radio receiver into a free USB port of your PC or notebook.

The driver is automatically installed by the Microsoft Windows

2000/XP operating

system.

2. During this short, one-off, procedure a message appears first "New hardware found

(Human Interface Device)"; followed by the message "The new hardware has been

installed and can now be used."

3. Please press the button on the USB receiver first to start one-off and automatic

radio tuning between the USB receiver and mini-mouse.

4. Then press the connection button on the underside of the mini-mouse within 20

seconds (see Figure below).

3. Inserting the

batteries

4. Push on the battery

cover

Connection button on

underside of the mouse

Connection button on

USB receiver