Bluetooth Car Radio GB KH 2377 Bluetooth Car Radio Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.
3 5 4 6 7 41 42 43 44 45 27 26 46 61 25 24 23 60 47 65 22 59 58 48 64 56 49 50 63 55 51 54 52 21 57 20 19 18 17 16 28 15 29 14 13 12 11 10 9 8 30 62 53 66 31 31 32 67 33 34 35 68 40 39 38 69 36 70 37
Index Introduction . . . . . . . . . . . . . .2 Handling and operation . . .16 Preface . . . . . . . . . . . . . . . . . . . . . . . 2 Information for these operating instructions . . . . . . . . . . . . . . . . . . . . 2 Copyright . . . . . . . . . . . . . . . . . . . . . 2 Limited liability . . . . . . . . . . . . . . . . . 3 Warnings . . . . . . . . . . . . . . . . . . . . . 3 Proper use. . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Introduction GB IE Preface Dear customer, by purchasing the Bluetooth car radio you have decided on a quality product from SilverCrest, which, in terms of technology and functionality, meets the most up-to-date development standards. Read the information included here so that you can quickly familiarize yourself with your device and thus make full use of its functions. We wish you a great deal of enjoyable use.
Introduction Limited liability GB IE All technical information, data and information for installation, connection and operation contained in these operating instructions correspond to the latest at time of printing and, to the best of our knowledge, take into account our previous experience and know-how. No claims can be derived from the details, illustrations and descriptions in these instructions.
Introduction Proper use GB IE This device is intended only for reception of FM/AM radio stations as well as for the playback of audio and MP3 CDs, MP3 files from USB data carriers and SD/MMC memory cards as well as audio signals of external audio devices. In addition you can couple the device with a Bluetooth mobile phone and with the microphone unit use the device as a hands free facility. The device is intended for installation into a vehicle.
Introduction ■ Damaged cables or connections should be replaced by authorized qualified persons or by the customer service department. GB IE ■ Persons who, due to their physical, intellectual or motor abilities, are incapable of operating the device safely may only use the device under supervision or direction from a responsible person. ■ Only permit children to use the device under supervision. ■ Repairs should only be carried out by authorized specialist companies or by the customer service department.
Introduction Traffic safety GB IE WARNING Safety in traffic has the highest priority! Observe the following safety instructions so that you do not put yourself or others in danger: ► Before travel commencement familiarize yourself with the operation of the device. ► Only operate the device when the traffic situation allows. Stop in a suitable place to carry out comprehensive operations. ► Only remove or insert the face plate when the vehicle is parked.
Introduction Package contents and transport inspection GB IE WARNING Risk of suffocation! ► Packaging material should not be used as a play thing. There is a risk of suffocation! The device is delivered with the following components as standard: ▯ Car radio (incl. face plate) ▯ Installation bracket (Attached) ▯ Bezel frame (Attached) ▯ Fixture plate (incl.
Operating components Operating components GB IE Car radio POWER/DIM: Switch device on and off/dim display illumination 21 PTY/9: Station search by 2 MODE: Set the operating mode 22 3 Multi controller/SEL: Turn to set value/volume TA/8: Activate traffic radio station/ number button 8 23 4 Sensor for remote control AF/7: Alternative Frequency search/regional programme activation, number button 7 24 RDM/4: Random playback in the CD/MP3 operation mode, number button 4 5 Display 6 Unlocking the f
Operating components Remote control 41 POWER/DIM: Switch device on and off/dim display illumination Accessories 62 Microphone unit plug 63 Microphone 42 button: End call 64 TALK button 43 I◂◂: Title / Station search backwards 65 green LED for connection status 66 Case for face plate VOL: Volume increase 67 Bezel frame 68 Installation bracket 44 45 button: Accept call 46 ▸▸I: Title / Station search forwards 69 Key for installation bracket 47 INT/3: Intro function in the CD/MP3 oper
Installation Installation GB IE WARNING With the installation of the device damage can occur! ► If possible have the device installed by a qualified technician. ► If you want to install the device yourself, for safe and flawless operation of the device follow the instructions for connection and installation. Connection IMPORTANT The use of incorrect connections can lead to damage to the device. ► For installation use the device's ISO connections.
Installation To connect the device to two speakers use only the cables for the front speakers. GB IE NOTICE ► Make sure that a permanent positive connection is applied to the station memory of connection 4 in the ISO block A. ► In some automobile models the standard configuration of the connections [4] and [7] in ISO block A are interchanged at the factory. If this is the case the station memory can be lost.
Installation Connection schematic GB IE Antenna Subwoofer Bluetooth antenna 1 3 ISO B ISO A External amplifier Microphone unit Installation The device can be installed into any standard ISO mounting duct. In the event that your vehicle does not have an ISO mounting duct contact your local specialist establishment, local dealer or the technical department of the store.
Installation ■ To avoid function disturbances the installation angle should be less than 30°. GB IE ■ Do not install the device in a location where it will be subjected to high temperatures (i. e. direct sunlight or heating vents), heavy contamination and strong vibrations. ■ In the event that changes to the vehicle are necessary contact your vehicle dealer/qualified radio installation facility.
Installation If necessary secure your device against theft with additional measures. Attach the securing screw with the anchoring plate 70 and the securing material to the engine firewall of the vehicle. GB IE Carefully push the device into the mounting duct until it locks into place. After all connections have been made activate the RESET button with a ball point pen or other pointed object. Attach the face plate as described under "Installing the face plate".
Initial use Initial use GB IE Face plate To protect against theft you can remove the face plate from your device. Do not store the removed face plate in your vehicle. NOTICE ► When the face plate is not inserted into the frame the theft protection LED 30 on the device blinks. ► To safeguard the face plate always keep it stored in its case. Installing the face plate Place the face plate with the left side in the frame first. Then firmly press the right side until it locks into place.
Handling and operation Remote control GB IE Inserting the battery NOTICE ► The supplied battery (Type CR2025) is already installed in the remote control when delivered. Before use remove the isolation strip from the battery compartment. For replacement with a new battery procede as follows: Pull the battery compartment out of the remote control by pressing the lateral locking device and at the same time pull the battery compartment out.
Handling and operation Switching On and Off GB IE Press briefly the POWER/DIM button to switch the device on. In the display the notice WELCOME appears. Briefly tap the POWER/DIM button. In the display appears AUTO DIM. Briefly tap the POWER/DIM button again. In the display appears MAN DIM. AUTO DIM: The display illumination will, depending on the lighting conditions, set automatically. MAN DIM: The display illumination can be set in two stages (H = High and L = Low) by turning the multi controller.
Handling and operation Bass/Treble/Balance/Fader GB IE Press the SEL button on the remote control or the multi controller on the device. The current volume level is shown. Each additional press of the SEL button or the multi controller accesses the next setting point.
Handling and operation TAVOL - Volume for traffic radio GB IE Turn the multi controller to set the volume level, with which traffic reports are to be played back. EON - Information from other stations When the EON function is switched on the radio switches to traffic radio or PTY groups if the TA or PTY function has been activated. Turn the multi controller in order to switch the EON function on (EON ON) or off (EON OFF).
Handling and operation Loudness GB IE Hold down the MODE button to switch the loudness function on or off. In the display appears LOUD ON and/or LOUD OFF. Operating mode Press the MODE button to switch between radio reception (Frequency indicator), CD/MP3 operation (CD), memory card slot (SD/MMC), USB port (USB) and audio input (AUX). NOTICE ► The operating modes CD, SD/MMC and USB can only be accessed when the corresponding medium is inserted.
Handling and operation Radio functions GB IE Select frequency range Press the BAND/ENT button to switch between VHF (F1, F2, F3) and medium wave (M1, M2). Automatic station search Press briefly the buttons I◂◂ or ▸▸I to start a station search. The search will stop when a station is found. Manual station selection Hold down one of the buttons I◂◂ or ▸▸I for two seconds, in the display appears MANUAL. Now press the buttons I◂◂ or ▸▸I to change the frequency in steps of 0.
Handling and operation Automatic saving GB IE Hold down the AS/PS button for 3 seconds . A search immediately starts whereby each found station remains for approx. five seconds. The station indicator and/or the station frequency blinks and the memory slot is displayed. With weak stations the search will automatically continue. Running through saved stations Press briefly the AS/PS button. All stations will be briefly selected. When you hear the desired station press the AS/PS button.
Handling and operation GB IE NOTICE ► Please note that this information is dependent on the region, the broadcasting corporation and the station. ► For this function the EON function must be switched on. Setting the PTY identification Press the PTY button and subsequently press repeatedly one of the number buttons 1 to 6 to select the desired PTY input. To switch between the PTY inputs "Musical genre" and "Talk contributions" by the indicator of the first PTY input press the PTY button again.
Handling and operation Traffic radio (TA - "Traffic Announcement") GB IE For this function the EON function must be switched on. Press the TA button to switch this mode on or off. In the TA mode the device will immediately switch from other stations or operation modes to the radio station, which is currently broadcasting traffic information. With this the volume level entered under TAVOL will be set.
Handling and operation Title skip GB IE Press the buttons ▸▸I or I◂◂ to select the next and/or previous title. The title number will be shown in the display. Fast forward/backward Hold down the buttons ▸▸I or I◂◂ longer to start fast forward or backward. Stop playback Press the PAU/1, button to stop playback. To continue playback press the PAU/1 button once more. Repeat function (RPT - Repeat) Press several times the RPT/2 button to switch between the repeat functions.
Handling and operation MP3 CDs functions GB IE Playback ■ The device can playback files in the MP3 and WMA formats. ■ A mixture of titles and directories on the same level can result in problems when playing back. ■ During playback the information from the ID3 tag of the MP3 files are read and are shown successively in the display. Skip directory Press the number button 6 to playback the next directory and/or the number button 5 to playback the previous directory.
Handling and operation GB IE NOTICE ► If no titles are found that begin with the set character NO MEDIA will be shown briefly and you can carry out the setting again. Turn the multi controller to select a title and start playback with BAND/ENT. Search for directories Press the AS/PS button three times. The directory that is currently playing back appears. Turn the multi controller to switch between the available directories. Press the BAND/ENT button to select the currently shown directory.
Handling and operation Playback and search functions GB IE ■ The operations for playing files on the external data carrier as well as the search function are exactly the same as with MP3 CDs. ■ If the device is in a different mode (CD, Radio, AUX or MMC) you can select the USB data carrier with the MODE button. Card reader (SD/MMC) The device can process SD/MMC memory cards up to 2 GB and SDHC memory cards up to 32 GB.
Handling and operation Recording GB IE Place a memory medium into the card slot or connect a data carrier to the USB port. Insert the CD, if necessary, and/or switch on the external audio device. With the MODE button set the desired operation mode (CD, Radio, AUX). If necessary start playback of the external audio device. Hold down the SCAN/REC button until REC MMC or REC USB is displayed. In the operation mode CD, MMC ALL or USB ALL will be diplayed.
Handling and operation Press the SCAN/REC button several times to select either the copying option COPY USB (copying on USB data carriers) or COPY MMC (copying on SD/MMC cards). GB IE Start the copy process by pressing the BAND/ENT button. During the copy process COPY appears in the display and a percentage indicator from 01 - 100 shows the copying progress. After the notice COPY 100 the copying process is ended and playback of the MP3 title continues.
Handling and operation GB IE NOTICE ► Do not mount the microphone in the vicinity of speakers otherwise the voice quality may deteriorate. Call accept/end With an incoming call you hear the call signal via your mobile phone, whilst in the device's display is shown the call number. You accept an incoming call by pressing the TALK button on the microbutton on the device and/or on the remote control.
Handling and operation Caller lists GB IE Press the PHONE button on the device. CALL LIST appears in the display Press the PHONE button again. IN CALL appears in the display. Turn the multi controller to select between the following displays: – IN CALL: Shows the last 20 incoming calls. – OUT CALL: Shows the last 20 outgoing calls. Press the PHONE button again. READING appears in the display and subsequently shows the last incoming (IN CALL) and/or dialled (OUT CALL) call number.
Cleaning Deleting the caller lists and telephone book entries GB IE Press and hold the button on the device and/or on the remote control until RESET appears in the display. The Bluetooth connection to the mobile phone is severed and all telephone book entries and caller lists on the device are deleted. Audio streaming (A2DP) The device uses the A2DP profile (Advanced Audio Distribution Profile) and therefore can playback your mobile phone's audio data.
Cleaning Cleaning GB IE Safety instructions IMPORTANT Possible damage to the device ► Make sure when you are cleaning the device that no moisture gets inside in order to avoid irreparable damage to it. Display cleaning ■ Clean the front panel of the device / the display exclusively with a soft, moist, lint-free cloth and a mild dish washing liquid. Disposal Disposal of the device Do not dispose of the device in your normal domestic waste.
Troubleshooting Troubleshooting GB IE In this chapter you will receive important information for malfunction localization and remedies. Observe the instructions in order to avoid danger and damage. Safety instructions WARNING Observe the following safety information to avoid danger and property damage: ► Repairs to electronic devices may only be carried out by specialists who have been trained by the manufacturer.
Troubleshooting Defect GB IE Function buttons are not functioning The CD jumps Possible cause Solution There is a malfunction with the device. Press the RESET button. The face plate is not correctly installed. Check to see that the face plate is installed correctly. The mounting angle exceeds 30°. Correct the mounting angle. The CD is very dirty or defective. Clean the CD or insert a different CD. Failure with burnt CDs Check the burnt CD in another playback device.
Appendix Appendix GB IE Technical data General Input voltage 12 VDC Input current max. 10 A 4 x 40 W Power rating (with 1% distortion factor) 4 x 13.5 W Operating temperature +5 - +40 °C 5 - 90 % 18.6 x 20.6 x 5.7 cm approx. 1480 g 10 A Frequency FM (VHF) 87.5 - 108 MHz Frequency AM (MW) 522 - 1620 kHz Station memory slots FM (VHF) 18 Slots Station memory slots AM (MW) 12 Slots 3 V 3.5 mm Max.
Appendix Declaration of EG conformity GB IE This device complies in regard to conformity with the basic requirements and other relevent regulations of the vehicle directive 2004/104/EC and the R&TTE directive 1999/5/EC. The complete original declaration of conformity can be obtained from the importer. Warranty You receive a 3-year warranty for this device as of the purchase date. This device has been manufactured with care and meticulously examined before delivery.
Warranty Fill in this section and submit it with the device! Bluetooth Car Radio KH 2377 In order to guarantee a cost free repair procedure please get in touch with the service hotline. Ensure you have your sales slip handy. Kompernass Service Ireland Tel: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.
Buch_53368_GB.indb Abs5:40 02.09.
