HOME TECH Micro Stereo System 6 KH 2311 CY Micro Stereo System Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 · D - 44867 BOCHUM www.kompernass.com ID-Nr.: KH2311-02/10-V3 CV_KH2311_DT49401_LB6.indd 1-3 30.03.
KH 2311 1 2 j h g f d s a p 3 4 5 6 7 8 9 o i 0 u k zt re wq k M N m 5# B 5@ V C X Y L K J H 5! D l n F G y b CV_KH2311_DT49401_LB6.indd 4-6 v c x 30.03.
CONTENT PAGE Intended Usage 2 Contents 2 Technical Data 2 Safety instructions 2 Positioning the device 3 The operating components 4 Inserting the batteries 4 Becoming acquainted with the remote control 4 Connecting the components 4 Switching the device on and off 5 Setting the time 5 Selecting mode of operation 5 Setting the sound volume levels 5 Setting the sound quality 5 Using headphones 5 Operating the radio 5 Operating the CD player 6 MP3/WMA functions 7 Playback o
Intended Usage Weight Main device: Per speaker: Operating temperature: Storage temperature : Protection class: This Micro system is intended exclusively for the playback of audio CDs, MP3/WMA CDs, CD-R, CD-RW, USB storage mediums, audio cassettes and for the playback of radio programmes. Additionally, the Micro system is suitable for the recording of audio cassettes. The Micro system is not intended for use in commercial or industrial environments.
Notice regarding disconnection from mainspower Danger of eye injuries! • This device is fitted with a "Class 1 Laser". Never look directly into an open CD compartment The invisible laser beam can damage your eyes. To completely disconnect the device from mains power, the plug must be removed from the power socket.
The operating components Inserting the batteries On the device q CD compartment w OPEN/CLOSE The remote control requires a 3 V battery type CR2032, which has been preinstalled at the factory. To protect against premature discharging the poles have been isolated with a plastic strip, which you can simply pull out before initial operation. The remote control is then ready for operation.
Switching the device on and off > For this press repeatedly the FUNCTION button on the device or on the remote control until the desired operation mode is shown in the display. To supply the device with mains power, place the power switch on the rear panel of the Micro system to the "ON" position. The LED STANDBY lights up. Setting the sound volume levels > To switch the device on press the STANDBY button on the device or the STANDBY/ON button on the remote control.
Playback stop/resume > During playback press the / PLAY/PAUSE/BAND button on the device and/or on the remote control to stop playback. With stopped CD playback the number of the currently playing title and the pause symbol blink in the display. > To resume playback press the / PLAY/PAUSE/BAND button once more. > To activate the radio function keep pressing the FUNCTION button on the device and/or on the remote control until appears in the display.
Programme playing order You can programme an order in which the titles of a CD are to be played. 32 programme slots are available for this purpose. Programming is only possible when playback is stopped. Playback of the CD starts automatically and in the display appears the playback symbol . Alternating with the title number the display shows the number of the folder from which is currently being played (i.e. F01 as the 1st. folder in alphabetical order). > Press the button PROG/CLOCK-ADJ. on the device.
Playback of USB memory devices > To save the selected folder press the button PROG/ CLOCK-ADJ.. > Select with the buttons SKIP/SEARCH and/or SKIP/SEARCH the desired title for the indicated programme slot. > To save the selected title press the button PROG/CLOCK-ADJ.. > To programme further titles, repeat the previously described steps. When all programme slots are occupied FUL will be shown in the display. The Micro system is equipped with a USB port.
Setting the alarm wake time Winding the cassette forward and backward Note: Only use the wind function when the tape is stopped otherwise the tape could be damaged. With the Micro system you can be awakened by a radio programme, from the sound of a CD, a USB memory medium or with a signal tone. For this you can programme two wake times. > Press the cassette key to wind the tape forwards. > Press the cassette key to wind the tape backwards. > Press the key to stop winding.
Snooze function Troubleshooting > Press the button SNOOZE on the device as soon as the radio, CD, USB or the signal tone sounds. The alarm stops and switches back on after approx. 9 minutes. > The alarm automatically switches off after 30 minutes if you do not press any buttons. Likewise, the snooze function switches off after 30 minutes. > To switch the wake function off until the next day press, whilst the alarm is sounding, the button AL. SET/OFF or . The notice remains and/or in the display.
Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured.
Buch_49401_LB6.indb 12 30.03.
