Projection Alarm Clock 6 KH 2218 Projection Alarm Clock KOMPERNASS GMBH BURGSTRASSE 21 ⋅ D-44867 BOCHUM www.kompernass.com ID-Nr.
KH 2218
INDEX PAGE Intended Use 2 Items supplied 2 Technical Data 2 Safety information 2 The appliance components 4 Putting the appliance into use 5 Radio operation 8 Cleaning 10 Troubleshooting 10 Notice regarding conformity 10 Importer 10 Disposal 11 Warranty & Service 11 Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference.
Dimensions (W x H x D): 21 x 7 x 14.1 cm Weight : 840 g approx. Protection class: II / Backup Batteries 2 x 1.5 V, Type AAA/ Micro (not supplied) Projection Alarm Clock KH 2218 This documentation is copyright protected. All rights including those of photographic reproduction, duplication and distribution by means of particular methods (for example data processing, data carriers and data networks), wholly or partially as well as substantive and technical changes are reserved.
• This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. • Provide a stable location for the appliance.
• Never cover the ventilation slots of the appliance while it is switched on. • Do not place open fire sources, such as candles, on or near the appliance. Caution with thunderstorms! • Equipment connected to a power supply can be damaged during a thunderstorm. You should therefore always pull the power plug from the power socket when there is a storm. This could mean that it must be disconnected from the power supply and then reconnected. The batteries (if present) must be removed and then reinserted.
Putting the appliance into use 2. Press the buttons DOWN/UP g/d to set the time at minute intervals. Pressing and holding the button changes the time in ten-minute intervals. Setting the date 1. Press the MODE button y once again. In the display j the date indication "01.01.2009“ blinks. 2. Press the buttons UP/DOWN g/d to set the date in day intervals. Pressing and holding one of the buttons changes the date in a fast sequence. Programme City 1. Press the MODE button y once again.
Abbr. ROM CAI IST MOW KWI DXB KHI DAC BKK SIN HKG PEK TYO SYD NOU Programme the reminder function You can programme in up to 10 dates on which the appliance can give you a reminder when they arrive. Diff.
3. Press the button UP d to return to the 24 hour modus. Adjusting the projection duration 1. Press the MODE button y once again. The display j indicates "PROJ T OFF". 2. Press the buttons DOWN/UP g/d to adjust the projection duration to between 01 and 59 minutes. In the adjustment "OFF“ the projection is permanent and can be switched off by pressing the PROJECTION button r once again. set the desired alarm time. 3.
Radio operation 8. If needed, programme the other memory positions for alarm times as detailed above. When the alarm signal sounds... • ... and the alarm function "Radio" is selected, the radio switches itself on with increasing sound volume and the last adjusted radio station for one hour. • ... and the alarm function "Signaltones" has been selected, the signal tone sounds for 10 minutes. To close the individual alarm function press any button except the SNOOZE button f.
Automatic station search You can also let the appliance search for radio stations. The radio alarm then searches the selected frequency range until it has found a radio station. AMS (Automatic Memory System) With the AMS function the radio searches automatically for radio stations and then saves them to the memory positions.. • Press and hold the button A.M.S. Memory s for two seconds. The radio alarm automatically searches for sufficiently powerful radio stations and saves them in the memory.
Dimming the Display You can adjust the display brightness in three levels by pressing the SNOOZE / Dimmer Control button f. Projection The time can be projected from the appliance onto a wall or the ceiling. This function is intended for reading the time in darkness. During the day in well lit rooms you will hardly be able to use the projection facility. 1. For this, first fold the projector u out. 2. Switch the function on with the Projection button r. 3.
Disposal Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC.
- 12 -
