Operation Manual

31
English
CD playback
The player supports music CDs.
Insert/eject music CD
Switch on the unit and activate it by pressing the DVD button on your remote
control or by pressing SOURCE several times on the unit in DVD mode. Slide the
CD into the CD/DVD tray, it closes automatically. CD playback begins
automatically. To eject the CD press on the Eject button either on the remote
control or on the unit.
Note:
 Only insert a CD if DVD mode is activated. Otherwise the tray will not
close automatically.
 Ensure that the tray is empty beforehand by pressing the Eject button.
Playback / Pause / Stop
Once you have inserted a music CD the first track is automatically played. Press
PAUSE to pause or restart playback. To end playback press STOP .
Skip forward / back
You can skip forward or back one track with the  and  buttons (either on the
remote control or on the unit).
Use GOTO to select a particular location on a track.
 Disk goto
Press GOTO once and then enter the total time of the point where you wish to
skip to.
 Track goto
Press GOTO twice and then enter the time within the current track where you
wish to skip to. This function only works while a track is being played.
 Select track
Press GOTO three times (only twice if playback is stopped) and then enter the
track number of where you wish to skip to. By repeatedly pressing the +10
button you can select two digit tracks.
Quick motion
You can activate quick motion in fast forward or rewind with the  and  buttons
(on the remote or on the unit). Press it repeatedly to choose between 2x, 4x, 8x,
16x and 32x speeds. Press the Play  button to revert to playback at normal
speed.