Operation Manual

16
English
Timer
You can use the timer function to switch your
unit on or off automatically. To set the timer,
the unit must be in DVD, TV, DVB-T or AV
mode, as the screen is required. Press SET to
access the timer menu. You can navigate
between the following options using the  and
 buttons. Press SET again to exit the menu.
 Timer
You can switch the Timer on or off here using the  and  buttons.
 Power on
Enter the Power On time of the unit in AM/PM format here via the number
buttons on the remote control. Use the  and  buttons to select either AM or
PM.
If a time has already been set you can delete it by pressing a number button on
the remote control. A deactivated Power On time is denoted by _ _:_ _
am
/
pm
 Power off
Enter the Power Off time of the unit in AM/PM. format here via the number
buttons on the remote control. Use the  and  buttons to select either AM or
PM.
If a time has already been set you can delete it by pressing a number button on
the remote control. A deactivated Power Off time is denoted by _ _:_ _
am
/
pm
 Signal
You can use the  and  buttons to select the signal source (TV, FM radio
and AM radio) to play back after the unit is automatically powered on.
 Channel
Use the number buttons on the remote control to select the TV channel or radio
channel to be played. Please note that you have only 0 to 19 radio channel
presets on the radio. For this reason you must enter one or two leading zeroes.