Operation Manual

14
English
Assembly
The best place to install the unit is under a hanging kitchen cupboard. You can use
the mounting diagram supplied to determine where to drill the holes (5mm in
diameter). The unit should be mounted using the screws provided.
Ensure that there is a gap of at least 40mm between the wall and the back of the
unit and follow the safety guidelines on page 4.
Warning:
There is a risk of damage to the unit if the screws are not used properly. This
can occur if you use screws that are too long or insert them at a depth
greater than 20mm into the unit.
Warning:
Only technically experienced users should install the unit. If this is not the
case installation should be carried out by a professional.