Operation Manual

94 IUK 5 A1

NOTE

► If possible, keep the original packaging of the device for the warranty period so that the device

can be packed properly for return shipment in the event of a warranty claim.

Set-up location requirements

For safe and trouble-free operation of the device, the set-up location must fulﬁ l the following requirements:

■ Set up the device on a ﬁ rm, ﬂ at and horizontal surface.

■ The surfaces of some items of furniture might contain components that can corrode and soften the

rubber pads of the device. If necessary, place a cover under the device’s pads.

■ Or install the device using the mounting materials

that are included in the delivery to ﬁ x the

mounting arm onto the wall as shown in the following diagram.

■ After you have attached the mounting arm with the screws and wall plugs , turn the hand

screw (A) into the thread on the bottom of the camera base .

■ If required, loosen the screw connection (B) to adjust the angle of the mounting arm

. Then

retighten the screw connection (B) so that the camera is held securely on the mounting arm .

■ Operate the device only in dry locations, never in a hot environment or anywhere near ﬂ ammable

materials.

■ Operate the device only in locations with adequate ventilation.