Operation Manual

123IUK 5 A1
GB
Fault causes and rectification
The following table will help to identify and rectify minor malfunctions:
Malfunction Possible cause Remedy
The camera
does not work.
Power supply inter-
rupted.
Plug the supplied mains adapter into a power outlet
and connect the plug of the adapter cable into the
power supply socket
.
Network connection
faulty.
Start the "Search Tool" software on the supplied CD
to set up the connection between the camera and the
computer.
The image is
too bright/dark.
The brightness needs
adjustment.
Connect to the camera via the web browser. Move
the "Brightness" slider to the right to make the image
brighter. Move the "Brightness" slider to the left to
make the image darker.
The image is
blurred.
The contrast needs
adjustment.
Connect to the camera via the web browser. Move the
"Contrast" slider to the right to set a higher contrast.
Move the "Contrast" slider to the left to set a lower
contrast.
Turn the focus ring
clockwise/anticlockwise to
focus the image manually.
The camera is
unresponsive.
Internal error. Use a small pointed object to carefully carefully push
the reset switch
through the opening on the under-
side of the device.
NOTE
► If you are unable to resolve the problem by taking any of the aforementioned steps, please
contact the Customer Service department.