Operation Manual

│

5 ■

EKWC 11 A1

Disposal of packaging materials

The packaging protects the appliance from damage during carriage. The pack-

aging materials have been selected for their environmental friendliness and ease

of disposal, and are therefore recyclable.

Returning the packaging to the materials cycle conserves raw materials and

reduces the amount of waste that is generated. Dispose of packaging materials

that are no longer needed in accordance with applicable local regulations.

NOTE

► If possible, keep the original packaging of the appliance during the warranty

period so that the appliance can be packed properly for returning in the

event of a warranty claim.

Note the labelling on the packaging and separate the packaging material

components for disposal if necessary. The packaging material is labelled with

abbreviations (b) and numbers (a) with the following meanings:

1–7: Plastics

20–22: Paper and cardboard

80–98: Composites

Installation

1. Place the scales on a level, ﬁrm surface.

2. Place the cradle  on the two protruding pins . The holes for the screws 

must be above the gaps for the pins .

3. Push the screws  through the holes in the cradle  from above and screw

them in using a Phillips screwdriver.

4. Place the weighing bowl  on the cradle .

NOTE

► The appliance may only be used when fully assembled.