Operation Manual

- 6 -
Plugging in and ironing
Dry ironing is possible at all temperatures, steam iro-
ning is possible by adjusting to on the
thermostat 6.
• Insert the plug into a power socket.
Attention!
Should the clothing care instructions forbid ironing,
(symbol ), the clothing item may not be ironed.
If you do so, the clothing item could be permanently
damaged.
• Check the care instructions on the labels in the
garment to see whether it is suitable for being
ironed, and at which temperature setting.
• Select the best suitable temperature setting with
the thermostat 6.
The temperature control lamp 7 glows. When the
set temperature has been reached, the temperature
control lamp 7 goes out.
• Wait until the temperature control lamp 7
switches off.
• To moisten the laundry, press the button for fine
water spray 5.
Symbol thermostat 6
Type of material
Acrylic, rayon
Silk, wool, polyester
blended fabrics,
viscose
Cotton, linen
This function is suitable for extremely dry and extremely
crumpled garments.
Steam ironing
• Set the steam regulator 3 to the desired steam
setting.
• The thermostat 6 must be moved to at least
adjustment range . Otherwise it cannot pro-
duce any steam.
Note:
After steam ironing, or if steam is no longer required,
set the steam regulator 3 to . Otherwise, water
may start dripping out of the ironing sole 0!
Ironing with steam blast
The steam blast is especially suitable for smoothing
parts of a garment that are difficult to reach.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast
button 4.
Temporarily setting the steam
iron aside
Risk of fire!
NEVER leave the hot, mains-connected or switched-on
steam iron unattended.
• Set the thermostat 6 to the "MIN" position.
• Always put the steam iron on the appliance
base 9.
IB_109628_DB1400A1_DK_BE.qxp 28.11.2014 13:51 Uhr Seite 6
DIN A5 148 mm x 210 mm