INSTRUCTIONS ASSEMBLY SILVERFISH MODEL NO. B8410 Please Do Nof Return This Product io the Store! Contort Fscolade® Spots customer service department ot Phone: 1-888-USA-GOAL Toll-Reel Fox: 1-866-873-3536 Toll-Fred! £-mail: “ e MDE Escalade® Sports products may be manufactured and/orlicensed under he following patents. 21.7672.00 6120397, 5816957, 5769744,5119741,4911085, 4717157, D460140, D420563, 8414431 Additional patents may be pending.
PER-ASSEMBLY TIPS PER-ASSEMBLY TIPS . Read this manual carefully before starling assembly. Read each step completely before beginning each step. . Some smaller pairs may be shipped inside larger parts. Check inside all parts and cartons before assembling or ordering pairs. . To make assembly easier, use the Hardware Identifier on page 5 to identify and sort all fasteners. Check all cartons for kits. All hardware may not be located in one kit. .
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. snare anxiety, do not attempt 1o assemble this system without following the Instructions carefully. maintained, and operated properly. # If using a ladder during assembly, use extreme caution. # Ensure there are no overhead power lines within 20 ft. (7m) radius of the mounting structure location. ® Climate, corrosion or misuse can result in hoop failure.
o / BASE PLATE CLAMP PLATE 25-9446-00 25-9445-00 QryY.1 QTY. 1 (Pr-installed on Backboard BACKBOARD (33" X 23") 4-8340-20. Please remove & FOLDING RIM ASSEMBLY base plate from the Backboard AA-8340-20 before starting assembly) QTY.1 7" BASKETBALL AIR PUMP & NEEDLE 3-9092-00 4-8461-00 QTY. 1 QrY.
0 / X 7 1/2" CARRIAGE BOLT for poles 1-7194-00 QTY. 4 Note: Use 5 1/2" carriage boles #8 for poles 1/2" X § 1/2" CARRIAGE BOLT carriage bolt #7 for poles for poles up to 4" 1-7204-00 QTY. KNOB, 5 LOBE 2-6475-00 THREAD CAP QTY. 4 3-9093-00 QTY.
You can attach the JR hoop fo rend poles and Caution: florets at squats poles up fo 4" with the 5 1/2” Carriage | AR bolt as shown below. To install on a basketball P e LT pole that is use the 7 1/2” Carriage Bolts. (LN EEC REIGN Adult ammo required. Mount Base plot #2 and Clamp Plate #3 as shown in Detail A, Detail B & Detail C. . o HOT: To install on a round pole follow Detail A & Add thread covers #10 Detail €.
Mount Backboard assembly to bracket as FINCH :o NOT . place your hand between shown in Adelaide A-C. the base plate & locking bracket and between the latch bar & base plate. A, Mount Backboard assembly (#1) 1o the B. Pull down and hold the larch bar then £. Release the Latch bar slowly until top slots of the the Base Praia Pivot the unit until it is flush to the Base the larch bar ends are inserted Plato (#02) in the Bose Plate Locking bracket e Basie plate @ \ Latch bar
Pivot rim down and insert pin as shown in Detail A & Detail B. A, £ pin Is inserted in the rim take it out, then pivot the B. Push down on the rim uni ll tha holes are aligned rim down gs shown in Detail A, and the pin can be inserted, NOTE: Mike sure you insert the pin all the way to secures the rim in place.
Attach Net #4 fo Rim Assembly. Loop net over Rom Oms, and tuck under as shown, Congratulations! The assembly is complete.
NOTE: Air Needle is located in the pump end cap, take it out and screw to the front of the air Air Needle pump as shown. storage A. Moisten Needier B. Insert beadle straight info the air valve on the basketball. €. In flute Basketball to 7" diameter. Remove needle quickly. B. Do not OVER INFLATE basketball past 7° diameter.
When the Jr. hoop is not in use, always return the rim to the storage position and make sure pin is inserted to secure the rim in place. See Detail A. Hems needed to clean backboard: Must use 100% cotton soft cloth. Mild dish wishing liquid sap. Luke worm water. Mild plastic polish to minimize scratches. Rinse backboard with lukewarm water. Wash gently with a 100% Condition soft cloth, lukewarm water and mild soap. Do not scrub. Rinse backboard with [lukewarm water again. Dry with 100% cotton soft cloth.
LIMITED 1 YEAR WARRANTY This consumer warranty extends to the original consumer purchase of any Escalade® Sports Product {hereinafter referred to as the “Product”}. WARRANTY COVERAGE: Escalations warrants to the original Consumer Purchaser that any Product of its manufacture is free from defects in material and workmanship.
