Operation Manual

Twin needle
* The twin needle is an optional accessory not supplied with your machine.
- Turn stitch length dial to the desired stitch length.
- Turn stitch selector to straight stitch, center needle position.
- For twin needle sewing, insert the extra spool pin (included with the accessories) into the
hole on top of the machine.
- Make sure that the two threads used to thread the twin needle are of the same weight. You
can use one or two colors.
- Insert the twin needle in the same way as single needle. Flat side of needle should face away
from you.
- Follow instructions for single needle threading.
Thread each needle separately.
Twin needle can also be use with decorative stitches, set stitch width dial between "0" and "4".
Please Note:
When sewing with twin needle, always proceed slowly, and make sure to maintain a low
speed to insure quality stitching.
When using twin needle on zig-zag (position "B") make sure the stitch width dial is set
between "0" and "4". Do not use twin needle at setting above "4".
1~40~4
- A -
38